Phylogeography of the seaweed Ishige okamurae (Phaeophyceae): evidence for glacial refugia in the northwest Pacific region

Although benthic marine algae are essential components of marine coastal systems that have been influenced profoundly by past and present climate change, our knowledge of seaweed phylogeography is limited. The brown alga Ishige okamurae Yendo occurs in the northwest Pacific, where it occupies a characteristic belt in the exposed intertidal zone. To understand the patterns of genetic diversity and the evolutionary history of this species, we analyzed mitochondrial cox3 from 14 populations (221 individuals) throughout its range. The 17 haplotypes found in this study formed five distinct clades, indicating significant genetic structure. The high differentiation and number of unique (private) haplotypes may result from the recolonization of the species from glacial refugia. Three putative refugia, each with high genetic diversity, were identified: southern Korea (including Jeju Island), northern Taiwan, and central Pacific Japan. Recolonization of I. okamurae was probably determined by ocean currents and changes in sea level during the last glacial period.     

Trans-boundary air pollution over remote islands in Japan: observed data and estimates from a numerical model

Observations of air pollutants were conducted in remote Japanese islands (Oki Island and Okinawa Island) in early spring to clarify the extent of trans-boundary air pollution from the Asian continent. A three-dimensional Eulerian model calculation, which included parameters on emission, transport and transformation of sulfur oxides, nitrogen oxides and ammonia, was performed to compile sulfate isosurface concentrations over the observational sites. Concentrations of non-sea-salt sulfate (nss-SO₄²⁻) of greater than 10 μg m⁻³ were observed at Oki after the northeastward passage of low-pressure systems in the Sea of Japan. At these times, the weather showed a typical winter pattern and air pollutants over China were transported southeastward to Japan with the northwesterly wind. The model calculation reproduced the observed variations of nss-SO₄²⁻ concentration well, except for one case in which the model calculation could not reproduce the extremely low nss-SO₄²⁻ concentration observed on 8 March. In Hedo (Okinawa Island), we observed long-lasting (3 days) medium concentrations of nss-SO₄²⁻ (approximately 5 μg m⁻³). Although the model reproduced these observed medium concentrations well, in general the observed results were reproduced better for Oki than for Hedo. Under the synoptic weather conditions of early spring, high concentrations of nss-sulfate were sometimes transported to these remote Japanese islands from areas of continental Asia with a strong outflow of air pollutants.     

Use of a broad β-diversity measure of pelagic ciliate communities for assessing vertical heterogeneity of water columns in the Pacific Arctic Ocean

Environmental Science and Pollution Research - Multivariate dispersion has proven to be a broad β-diversity measure that shows the heterogeneity of environmental conditions. The dispersion...     

Estimation of sources and inflow of dioxins and polycyclic aromatic hydrocarbons from the sediment core of Lake Suwa, Japan

To elucidate the historical changes in polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF), coplanar polychlorinated biphenyl (co-PCB), and polycyclic aromatic hydrocarbon (PAH) inflows in Lake Suwa, their concentrations in the sediment core were analyzed in 5 cm interval. The maximum concentrations (depth cm) of PCDDs/DFs, co-PCBs, and PAHs were 25.2 ng/g dry (30-35 cm), 19.0 ng/g dry (30-35 cm), and 738, 795 ng/g dry (50-55 cm, 30-35 cm), respectively. Age and sedimentation rate of the sediment were estimated from the vertical changes in apparent density. Deposition rate of dioxins and PAHs were calculated from the concentration and sedimentation rate of the sediment. The results indicate that large amounts of dioxins and PAHs flowed into the lake in flood stage compared to normal stage.     

Degradation characteristics of toluene,benzene, ethylbenzene,and xylene by Stenotrophomonas maltophilia T3-c

Stenotrophomonas maltophilia T3-c, isolated from a biofilter for the removal of benzene, toluene, ethylbenzene, and xylene (BTEX), could grow in a mineral salt medium containing toluene, benzene, or ethylbenzene as the sole source of carbon. The effect of environmental factors such as initial toluene mass, medium pH, and temperature on the degradation rate of toluene was investigated. The cosubstrate interactions in the BTEX mixture by the isolate were also studied. Within the range of initial toluene mass (from 23 to 70 pmol), an increased substrate concentration increased the specific degradation of toluene by S. maltophilia T3-c. The toluene degradation activity of S. maltophilia T3-c could be maintained at a broad pH range from 5 to 8. The rates at 20 and 40 degrees C were 43 and 83%, respectively, of the rate at 30 degrees C. The specific degradation rates of toluene, benzene, and ethylbenzene by strain T3-c were 2.38, 4.25, and 2.06 micromol/g-DCW/hr. While xylene could not be utilized as a growth substrate by S. maltophilia T3-c, the presence of toluene resulted in the cometabolic degradation of xylene. The specific degradation rate of toluene was increased by the presence of benzene, ethylbenzene, or xylene in binary mixtures. The presence of toluene or xylene in binary mixtures with benzene increased the specific degradation rate of benzene. The presence of ethylbenzene in binary mixtures with benzene inhibited benzene degradation. The presence of more than three kinds of substrates inhibited the specific degradation rate of benzene. All BTEX mixtures, except tri-mixtures of benzene, ethylbenzene, and xylene or mixtures of all four substrates, had little effect on the degradation of ethylbenzene by S. maltophilia T3-c. The utilization preference of the substrates by S. maltophilia T3-c was as follows: ethylbenzene was degraded fastest, followed by toluene and benzene. However, the specific degradation rates of substrates, in order, were benzene, toluene, and ethylbenzene.     

Influence of aeration rate and reactor shape on the composting of poultry manure and sawdust

To achieve successful composting, all the biological, chemical, and physical characteristics need to be considered. The investigation of our study was based on various physicochemical properties, i.e., temperature, ammonia concentration, carbon dioxide concentration, pH, electrical conductivity (EC), carbon/nitrogen (C/N) ratio, organic matter (OM) content, moisture content, bacterial population, and seed germination index (GI), during the composting of poultry manure and sawdust for different aeration rates and reactor shapes. Three cylindrical-shaped and three rectangular-shaped pilot-scale 60-L composting reactors were used in this study, with aeration rates of 0.3 (low), 0.6 (medium), and 0.9 (high) L min^?1 kg^?1 DM (dry matter). All parameters were monitored over 21 days of composting. Results showed that the low aeration rate (0.3 L min^?1 kg^?1 DM) corresponded to a higher and longer thermophilic phase than did the high aeration rate (0.9 L min^?1 kg^?1 DM). Ammonia and carbon dioxide volatilization were directly related to the temperature profile of the substrate, with significant differences between the low and high aeration rates during weeks 2 and 3 of composting but no significant difference observed during week 1. At the end of our study, the final values of pH, EC, moisture content, C/N ratio, and organic matter in all compost reactors were lower than those at the start. The growth rates of mesophilic and thermophilic bacteria were directly correlated with mesophilic and thermophilic conditions of the compost. The final GI of the cylindrical reactor with an airflow rate of 0.3 L min^?1 kg^?1 DM was 82.3%, whereas the GIs of the other compost reactors were below 80%. In this study, compost of a cylindrical reactor with a low aeration rate (0.3 L min^?1 kg^?1 DM) was more stable and mature than the other reactors.

Implications: The poultry industry is growing in South Korea, but there are problems associated with the management of poultry manure, and composting is one solution that could be valuable for crops and forage if managed properly. For high-quality composting, the aeration rate in different reactor shapes must be considered. The objective of this study was to investigate various physicochemical properties with different aeration rates and rector shapes. Results showed that aeration rate of 0.3 L min^?1 kg^?1 DM in a cylindrical reactor provides better condition for maturation of compost.     

Multilateral energy lending and urban bias in autocracies: promoting fossil fuels

Energy demand is growing rapidly across the world, and international funding agencies like the World Bank have responded by emphasizing energy in their project portfolios. Some of these projects promote the use of fossil fuels, while others support cleaner forms of energy. For climate change mitigation, it is important to understand how international funders decide on the choice between fossil fuels and cleaner sources of energy. Examining the energy funding portfolios of the nine most important international funders for the years 2008-2011, we show that funding for fossil fuels has been concentrated in highly urbanized autocracies. Due to economies of scale, fossil fuels are suitable for generating heat and electricity for densely populated urban areas. Autocratic rulers are subject to urban bias in their policy formulation because the support of concentrated urban constituencies is key to an autocrat’s political survival, and in democracies environmental constituencies can effectively oppose fossil fuel projects.     

Transgenic poplar trees expressing yeast cadmium factor 1 exhibit the characteristics necessary for the phytoremediation of mine tailing soil

Genetic engineering of plants for phytoremediation is thought to be possible based on results using model plants expressing genes involved in heavy metal resistance, which improve the plant’s tolerance of heavy metals and accumulation capacity. The next step of progress in this technology requires the genetic engineering of plants that produce large amounts of biomass and the testing of these transgenic plants in contaminated soils. Thus, we transformed a sterile line of poplar Populus alba X P. tremula var. glandulosa with a heavy metal resistance gene, ScYCF1 (yeast cadmium factor 1), which encodes a transporter that sequesters toxic metal(loid)s into the vacuoles of budding yeast, and tested these transgenic plants in soil taken from a closed mine site contaminated with multiple toxic metal(loid)s under greenhouse and field conditions. The YCF1-expressing transgenic poplar plants exhibited enhanced growth, reduced toxicity symptoms, and increased Cd content in the aerial tissue compared to the non-transgenic plants. Furthermore, the plants accumulated increased amounts of Cd, Zn, and Pb in the root, because they could establish an extensive root system in mine tailing soil. These results suggest that the generation of YCF1-expressing transgenic poplar represents the first step towards producing plants for phytoremediation. The YCF1-expressing poplar may be useful for phytostabilization and phytoattenuation, especially in highly contaminated regions, where wild-type plants cannot survive.     

Analysis and evaluation of chlorinated persistent organic compounds and PAHs in sludge in Korea

The concentrations of 12 POPs listed in the Stockholm convention, chlorophenols (CPs) and PAHs were investigated in sludge samples from wastewater and sewage treatment plants (WWTPs and STPs). The concentrations of PCDD/Fs in the wastewater sludge ranged from 0.189 to 1092 ng-TEQkg(-1) dry wt., and most of the sludge samples had levels below the EU guideline for the land application of PCDD/Fs (<100 ng-TEQkg(-1) dry wt.) except one sample. Co-PCB congeners were analyzed from four WWTPs, with total concentrations ranging from 0.265 to 26.6 ng-TEQkg(-1) dry wt., which were similar to the results obtained from previous studies. The levels of PCDD/Fs and Co-PCBs varied according to the main source of the influent to each WWTP and the paper industry was the main source of these compounds in the sludge due to the chlorine bleaching process. In case of OCPs, HCB and p,p'-DDE were detected at relatively high levels in the sludge samples compared to other target compounds, ranging from 1.30 to 21.5 microg kg(-1) dry wt. and 0.758 to 14.8 microg kg(-1) dry wt., respectively. Different OCP distribution patterns were observed according to sludge types, with HCB and DDTs being dominant in the sludge from WWTPs and STPs, respectively. The total levels of PAHs and CPs ranged from 1.24 to 44.9 mg kg(-1) dry wt. and 0.340 to 3.85 mg kg(-1) dry wt., respectively. The PAHs and CPs were also shown to have various distribution patterns, possibly due to the different wastewater sources to the WWTPs.     

Levels and patterns of polycyclic aromatic hydrocarbons (PAHs) in soils after forest fires in South Korea

Introduction  

To investigate the influence of biomass burning on the levels of polycyclic aromatic hydrocarbons (PAHs) in soils, temporal trends and profiles of 16 US Environmental Protection Agency priority PAHs were studied in soil and ash samples collected 1, 5, and 9 months after forest fires in South Korea.